Introduction: How to Change a Lock

Changing the locks is a quick, cheap and easy fashion to get peace of mind about your living situation. It requires little technical skill and no tools fancier than a screwdriver to replace the common deadbolt. Over the class of these instructions I will teach you how to supervene upon a basic dead bolt lock. This is an extremely handy thing to know how to practise.

While we often don't call back we will need to modify the locks, things practice happen. Roommates are known to go crazy, lovers are known to accept a change of heart, and keys are known to get stolen. By simply changing the deadbolts on all of the entryways to your abode, y'all tin can ensure no i tin easily unlock the door and walk in. If yous are at all worried almost your safety or well-existence, there is no reason not to practise this. Later on all, a new lock can be purchased for as little as $xv at your local hardware store and installed in nether 10 minutes.

Step 1: Purchase a New Lock

Go to the shop and purchase a new lock. Yous volition want to find i that is keyed on only one side and has a plough associates on the other.

The locks tend to be rated for their effectiveness, and information technology often does not cost remarkably more than for 1 that offers higher security. Find the one that you lot are most comfortable with that is inside your budget.

Nigh basic dead bolt kits include:

- A key lock cylinder
- A deadbolt assembly
- An interior plough assembly
- A steel strike plate (typically not necessary)
- Mounting hardware

(Annotation that some of the links on this page are chapter links. This does non change the toll of the item for yous. I reinvest any proceeds I receive into making new projects. If you would like any suggestions for alternative suppliers, please let me know.)

Step two: Remove the Old Lock

Remove the two visible bolts in the turn assembly plate and then remove the plow plate associates itself.

Finally, pull gratuitous the deadbolt lock assembly.

Y'all should now be able to see through the hole in the door.

Stride 3: Remove the Quondam Deadbolt

Look at the deadbolt plate on the side of the door and locate the two spiral heads holding it in identify.

Remove the two screws then simply pull the dead bolt out of the door.

Step 4: Insert a New Deadbolt

Basically, y'all are going to now do everything in contrary. Notwithstanding, when installing the new deadbolt you need to be mindful of the orientation of the unlike parts.

It is very of import to install the new deadbolt facing "up." Fortunately, nearly new deadbolts are labeled with the word "upwards" on the side which is supposed to be facing up. This makes life piece of cake.

If on the off-gamble it is non labeled, you lot can orient the deadbolt past matching the components to the motion picture shown higher up.

In one case oriented, insert the deadbolt into the door facing upwardly and employ the short woodscrews to firmly fasten information technology in place.

Step 5: Insert a New Deadbolt Lock

Insert the bar protruding from the new deadbolt lock through the channel in the deadbolt itself. Position the lock machinery such that the keyhole is vertically aligned.

On the opposite side, insert the bar into the aqueduct in the dorsum of the turn associates plate. Orient the plough assembly plate such that its top side is at the height.

Twist the knob on the turn assembly to expose the bolt holes. Use the included bolts to fasten the key assembly and the plough assembly firmly together.

Pace half dozen: Test the New Lock

One time the new lock is firmly fastened in place, with the door still open up, test information technology out using both the interior turn assembly and the cardinal lock.

Once you lot are sure it is working, test both with the door closed.

Assuming that they are both still working, you have changed the lock. Congratulations. Be Safe.

Did you find this useful, fun, or entertaining?
Follow @madeineuphoria to see my latest projects.

Be the Showtime to Share

Recommendations